Installing a new dishwasher is a big job, but it’s not too difficult if you follow these step-by-step instructions. You will need basic tools and supplies, including a screwdriver, pliers, and a hammer. The most important thing to remember is to read the installation instructions before you begin. If you are unsure about any steps, it’s best to call a Port St. Lucie 24 hour plumber for help.
Why do you need a new dishwasher in your home?
You might need or want to install a new dishwasher in your home for many reasons. Maybe your old one is starting to show its age and isn’t cleaning dishes as well as it used to. Or perhaps you’re moving into a new home with no dishwasher installed.
What tools and supplies do you need?
You’ll first need to gather the tools and supplies you’ll need for the job. This includes a screwdriver, pliers, and a hammer. You may also need some other supplies, depending on the type of dishwasher you’re installing. The most important thing to remember is to read the installation instructions before you begin.
How to install your new dishwasher:
Step one: Turn off the water to your sink. This is usually done by turning the knob underneath the sink to the “off” position.
Step two: Disconnect the dishwasher drain hose from the garbage disposal or sink drain. Use a pair of pliers to loosen the clamp that secures the hose to the drain. Then, pull the hose off of the drain and set it aside.
Step three: Remove any existing dishwasher mounting brackets from under your sink. You may need a screwdriver or a drill to remove these screws.
Step four: Position your new dishwasher in front of the opening under your sink. Make sure that there is enough space around it so that you can easily access all of its parts.
Step five: Use the dishwasher mounting bracket kit to secure your dishwasher to the underside of your countertop. The kit will come with everything you need, including screws and a drill bit.
Step six: Connect the water supply line to your new dishwasher. The pipe usually has a green-colored cap that needs to be removed before you can screw on the hose.
Tighten the connection with a wrench, turn on the water at the shut-off valve and check for leaks.
Step seven: Reconnect the dishwasher drain hose to the garbage disposal or sink drain. Make sure that the clamp is tightened so that there are no leaks.
Turn on your new dishwasher and run it through a cycle to ensure everything is working properly.
There you have it! You’ve successfully installed your new dishwasher. Now, enjoy the convenience of having someone else do the dishes for you!
When to call a pro
Your dishwasher is an important part of your kitchen, so it’s important to ensure it’s installed correctly. If you’re not confident in your ability to install the dishwasher yourself, or if you run into any problems along the way, don’t hesitate to call a professional for help. A few hundred dollars is a small price for peace of mind and a well-done job. Schedule a service appointment today!
